Wireless Network

Windows®

e Click Wireless Network users.

Note

For Windows Vista®, when the User Account Control screen appears, click Allow.

f Choose Wireless Setup and Driver Install (Recommended), and then click Next.

g Choose Automatic install (Advanced) and click Next.

h Confirm the on-screen message and click Next.

i Remove the label covering the USB interface connector to press the wireless setup button.

j Press the wireless setup button located at the back of the printer for less than 2 seconds as shown in the illustration below. This will put the printer in one-push wireless setting mode. This feature will automatically detect which mode your access point uses for one-push configuration (SecureEasySetup™,

Wi-Fi Protected Setup or AOSS™).

Note

•Use a pointy object such as a ballpoint pen to press the button.

•If you press the button for 3 seconds or more, the printer will change to the PIN Method of the Wi-Fi Protected Setup mode.

k The printer starts the one-push wireless setting mode.

The printer will search for an access point that supports SecureEasySetup™,

Wi-Fi Protected Setup or AOSS™ for 2 minutes.

30