Wireless Network

Macintosh

 

 

d

e

f

g

h

Click Install Printer Driver on the menu screen.

Click Wireless Network users.

Choose Wireless Setup and Driver Install (Recommended), and then click Next.

Choose Step by Step install (Recommended) and then click Next.

Choose With cable (Recommended) and then click Next.

i Connect the Brother wireless device (your printer) to your access point using a network cable and click Next.

j Choose the printer you wish to configure, and click Next. If the list is blank, check if the access point and the printer are powered on, and then click Refresh.

Note

•The default node name is “BRNxxxxxxxxxxxx”.

•You can find your printer’s MAC Address (Ethernet Address) by printing out the Printer Settings Page. See Print the Printer Settings Page on page 43.

34