Wireless Network

Windows®

Configuration using the automatic wireless (one-push) method

8

Configure the wireless

 

settings

If your wireless access point/router supports either

SecureEasySetup™, Wi-Fi Protected Setup (PBC 1) or AOSS™, you can configure the printer easily without knowing your wireless network settings.Your Brother printer has one-push wireless setting mode. This feature automatically detects which mode your access point uses for one-push configuration (SecureEasySetup™, Wi-Fi Protected Setup or AOSS™). By pushing a button on the wireless access point/router, you can setup the wireless network and security settings. See the user’s guide for your wireless access point/router for instructions on how to access one-push mode.

1Push Button Configuration

Note

Access points or Routers that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ have the symbols shown below.

c Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.

Choose your printer model and the language.

Note

If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click start.exe.

d Click Install Printer Driver on the menu screen.

Note

Choose the Install Printer Driver icon for your region.

a Make sure the printer power switch is on.

b Turn on your computer. (You must be logged on with Administrator rights.)

Wireless

Windows

®

Network

Macintosh

 

 

29