Wireless Network | Macintosh |
| |
Configuration using the automatic wireless (one-push) method
8 | Configure the wireless |
| settings |
If your wireless access point/router supports either
SecureEasySetup™, Wi-Fi Protected Setup (PBC 1) or AOSS™, you can configure the printer easily without knowing your wireless network settings.Your Brother printer has one-push wireless setting mode. This feature automatically detects which mode your access point uses for one-push configuration (SecureEasySetup™, Wi-Fi Protected Setup or AOSS™). By pushing a button on the wireless access point/router and the printer, you can setup the wireless network and security settings. See the user’s guide for your wireless access point/router for instructions on how to access one-push mode.
1Push Button Configuration
Note
Access points or Routers that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ have the symbols shown below.
a Make sure the printer power switch is on.
Turn on your Macintosh. Put the supplied CD- ROM into your CD-ROM drive.
Double-click the HL5300 icon on your desktop. Double-click the Start Here icon. Follow the on-screen instructions.
Click Install Printer Driver on the menu screen.
Click Wireless Network users.
Choose Wireless Setup and Driver Install (Recommended), and then click Next.
