For Network Users

BRAdmin Light utility (For Mac OS X users)

The BRAdmin Light is a utility for initial setup of Brother network connected devices. It can also search for Brother products on your network, view the status and configure basic network settings, such as IP Address from a computer running Mac OS X 10.3.9 or greater.

The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already installed the printer driver, you don’t have to install it again. For more information on BRAdmin Light, visit us at http://solutions.brother.com/.

 

c Double click the file BRAdmin Light.jar and

Set your IP Address, Subnet Mask

run the software. BRAdmin Light will then

and Gateway using BRAdmin Light

search for new devices automatically.

Note

•If you have a DHCP/BOOTP/RARP server in your network, you don’t have to do the following operation. The print server will automatically obtain its own IP Address.

•Make sure that version 1.4.2 or later of Java

client software is installed on your computer.

d Double-click the unconfigured device.

• The default password for the print server is

‘access’. You can use BRAdmin Light to

 

change this password.

 

a Double-click the Macintosh HD icon on your

 

desktop.

 

b Choose Library, Printers, Brother and then

e Choose STATIC for the Boot Method. Enter

Utilities.

the IP Address, Subnet Mask and Gateway,

 

 

and then click OK.

f The address information will be saved to the printer.

42