Wireless Network | Windows® |
n Click Next. The settings will be sent to your printer. The settings will remain unchanged if you click Cancel. The Network Configuration page will be printed.
Note
•If you want to manually enter the IP Address settings of your printer, click
Change IP Address and enter the necessary IP Address settings for your network.
•The wireless network setting will be automatically changed to enabled when the wireless settings are sent to your printer.
o Check the printed Network Configuration page.
Choose the status as it is shown for the Wireless Link Status on the Network Configuration page. Click Next.
If your status is “Link OK.”, go to q.
If your status is “Failed to Associate”, go to p.
p Click Finish. Wireless setup was unable to associate with a wireless network. This is probably due to incorrect security settings. Reset the network settings to the factory default (see page 43). Confirm the security settings of your wireless network that you wrote down on page 24 and try starting from e on page 25 again.
q Disconnect the network cable between your access point (hub or router) and the printer, and click Next.
Install the printer driver
| IMPORTANT |
|
|
|
| • DO NOT try to cancel any of the screens |
|
|
|
| during this installation. |
|
|
|
| • If your wireless settings fail, an error |
|
|
|
| message will appear during the installation |
|
|
|
| of the printer driver and the installation will |
|
|
|
| be terminated. If you encounter this failure, |
|
|
|
| reset the print server back to its default |
|
|
|
| factory setting (see page 43), and please go |
|
|
|
|
|
| Windows | |
| wireless connection again. |
| Wireless | |
|
|
| ||
r | When the License Agreement window | ® | ||
|
| |||
| appears, click Yes if you agree to the License |
|
| |
| Agreement. |
|
| |
|
|
| Network |
|
|
|
| Macintosh | |
|
|
|
|
|
27