Setup Misc.

Ethernet

Ethernet link mode. Auto allows the print server to operate in 100BaseTX full or half duplex, or in 10BaseT half duplex mode by auto negotiation.

100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print server link mode. This change is valid after the print server has been reset (default is Auto).

If you incorrectly set this value, you may not be able to communicate with your print server.

1Press Menu/Set, 5, 6, 1 for MFC-3340CN/MFC-5840CN. (4, 6, 1 for FAX-1940CN/MFC-5440CN)

2Press ▲ or ▼ to select Auto/100B-FD/100B-HD/10B-FD/10B-HD.

3Press Menu/Set.

4Press Stop/Exit.

Time Zone

This field displays the time zone you can set for your country. The time is the difference between your location and Greenwich Mean Time. This time will be shown on documents received via the Internet. For example the Time Zone for Eastern Time in the USA and Canada is GMT-05:00.

1Press Menu/Set, 5, 6, 2 for MFC-3340CN/MFC-5840CN. (4, 6, 2 for FAX-1940CN/MFC-5440CN)

2Press ▲ or ▼ to enter the time.

3Press Menu/Set.

4Press Stop/Exit.

1 - 19 CONTROL PANEL SETUP