Gateway

This field displays the current gateway or router address used by the machine. If you are not using DHCP or BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a gateway or router, leave this field blank. Check with your network manager if you are unsure.

1Press Menu/Set, 5, 1, 4 for MFC-3340CN/MFC-5840CN. (4, 1, 4 for FAX-1940CN/MFC-5440CN)

2Enter the Gateway address.

---OR---

Select 1.Change and enter the Gateway address.

3Press Menu/Set.

4Press Stop/Exit.

Host Name

You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name BRN_XXXXXX (where XXXXXX is the last six digits of the Ethernet address) (up to 15 characters).

1Press Menu/Set, 5, 1, 5 for MFC-3340CN/MFC-5840CN. (4, 1, 5 for FAX-1940CN/MFC-5440CN)

2Select 1.Change and enter the Host Name.

3Press Menu/Set.

4Press Stop/Exit.

WINS Config

This selection controls how the machine obtains the IP address for the WINS Server.

1Press Menu/Set, 5, 1, 6 for MFC-3340CN/MFC-5840CN. (4, 1, 6 for FAX-1940CN/MFC-5440CN)

CONTROL PANEL SETUP 1 - 6