7You will then see a message about Partial E-mail Print. Partial E-mail Print is the ability of the Brother Internet Print software to break down E-mail Print jobs into smaller sections to prevent a mail file size limitation problem for the mail server.

8Press OK to continue.

9You will then be asked to enter the port settings for the remote Print/Fax server:

Enter any unique legal Internet E-mail address for the remote Print/Fax server (for example emailprinter@xyz.com). Note that Internet E-mail addresses cannot have spaces in them.

Enter your E-mail address and the IP address of your SMTP E-mail server (consult your network administrator if you do not know this address). Also specify if you are going to use the Partial E-mail Print option and the Notification type.

10Press OK to continue. You will then be asked to re-start your computer.

11Once your computer has re-started you must create a printer on your Windows® 98/Me/2000/XP system using the standard Windows® 98/Me/2000/XP printer setup procedure. To do this,

go the Start button, select Settings and then Printers (Windows® 98/Me/2000/XP). To do this, go to the Control

Panel, select Printers and Other Hardware and then Printers and Faxes (or Add a printer)(Windows® XP)

12Select Add Printer to begin the printer installation.

13Click Next when you get the Add Printer Wizard window.

<For Windows® 98/Me users>

14Select Local Printer when you are asked how the printers are connected to your computer and push Next.

<For Windows® 2000/XP users>

14Select Local Printer, and then delete the check mark in Plug and Play check box.

CONFIGURING INTERNET PRINTING FOR WINDOWS® 3 - 6