Chapter 7
Search
You can search alphabetically for names you have stored in the One Touch and Speed Dial memories. (See Storing One Touch Dial numbers on page 42 and Storing Speed Dial numbers on page 44.)
a Press 
(Address Book) twice.
b Press the dial pad key for the first few letters of the name. (Use the chart on Entering text on page 122 to help you enter letters.)
Press OK.
c Press a or b to scroll until you find the name you are looking for.
Press OK. d Press Start.
Note
•If you do not enter a letter and press OK in step b, all registered names will appear. Press a or b to scroll until you find the name you are looking for.
•If the LCD shows No Contact Found when you enter the first few letters of the name, it means that a name for the letter is not stored.
Fax redial
If you are sending a fax manually and the line is busy, press Redial/Pause and try it again. You can call the last number dialed by pressing Redial/Pause.
Redial/Pause only works if you dialed from the control panel.
If you are sending a fax automatically and the line is busy, the machine will automatically redial one time after five minutes.
Storing numbers
You can set up your machine to do the following types of easy dialing: One Touch, Speed Dial and Groups for Broadcasting faxes. You can also specify the default resolution for each One Touch and Speed Dial number. When you dial a quick dial number, the LCD shows the name, if you stored it, or the number. A scan profile can also be stored along with the fax number.
If you lose electrical power, the quick dial numbers stored in the memory will not be lost.
A scan profile is the resolution and other scan settings that you choose when you store a number. For example, you will be asked to select Standard, Fine, or Photo if you have selected the
40