156
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Editing and Saving Patterns

This section describes ways to edit, adjust, reposition and memorize patterns.

Adjusting the layout

The pattern is normally positioned in the center of the
embroidery frame.
You can check the layout before starting embroidery
and change the position and the size.
Memo
zKeys that appear surrounded with a dotted
line cannot be used.
aAfter selecting the embroidery pattern, press
.
XThe sewing screen is displayed.
bPress .
XThe layout LCD is displayed.
cCheck and adjust the layout.
aLayout within the frame
bAvailable embroidery frames
cDisplay unit (cm/INCH)
dChange position keys
eSize key
fLayout key
gRotation key
hHorizontal mirror image key
iDistance from the center
jEmbroidery size
kStarting point key
• If you make a note of the values in the lower
part of screen when you change the size and
position, you can sew with the same size and
layout even if you have to turn the power
back on in the middle of your work.
Embroidery frame size
These flash if the pattern was resized,
the layout was adjusted, or the
recommended embroidery frame size
was changed. Embroidery frame icons
that appear in gray cannot be used.
Size key
Increases/decreases the size of the
pattern. Press to return to the
previous screen.
Decreases size
Returns to original size
Increases size
Change position keys
Moves the embroidery position up,
down, left and right.
Return to center position (when the
pattern was moved with the change
position key)
k
j
a b c d e f
g
h
i