Brother PE-DESIGN 7 manual Click Next to begin upgrading the USB card writer module

Note:

• If the product ID is incorrectly en- tered, the message “The product ID is incorrect. Check that a mistake was not made during typing.” ap- pears.

• The uppercase letters “I” and “O” are not used in the product ID.

Type in the 15-digit product ID on the label at- tached to the CD-ROM case, and then click Next.

→The entered product ID and the serial number auto- matically retrieved from the USB card writer module is displayed.

Click Next to access our server through the

Internet and retrieve the upgrade key.

Note:

•If a firewall is being used, set it so that the Internet can temporarily be accessed while the upgrade key is being obtained.

→If the upgrade key has been successfully retrieved, the dialog box shown below appears.

Click Next to begin upgrading the USB card writer module.

20