Brother PT-18R manual Inserting a Tape Cassette, AC Adapter

AC Adapter

Connect the AC adapter directly to the P-touch.

￿

GETTING STARTED

1Insert the plug on the AC adapter cord into the connector marked DC IN 9.5V on the P-touch.

2Insert the AC adapter plug into a standard electrical outlet.

• Turn the P-touch off before disconnecting the AC adapter.

• Disconnect the AC adapter from the P-touch and electrical outlet when you do not intend to use the P-touch for an extended period.

•Do not pull or bend the AC adapter cord.

•Use only the AC adapter (AD-60) designed exclusively for your P-touch. Failure to observe this may result in an accident or damage. Brother shall not assume any responsibility for any accident or damage resulting from not using the specified AC adapter.

•Do not connect the AC adapter to a non-standard electrical outlet. Failure to observe this may result in an accident or damage. Brother shall not assume any responsibility for any accident or damage resulting from not using a standard electrical outlet.

Inserting a Tape Cassette

Tape cassettes of 1/4", 3/8", 1/2" or 3/4" (6 mm, 9 mm, 12 mm, or 18 mm) width can be

used in your P-touch. Use only tape cassettes with the mark.

If the new tape cassette has a cardboard stopper, be sure to remove the stopper before inserting the cassette.

1

2

3

4

5

6

7

8

9

Inserting a Tape Cassette

19