LABEL PRINTING

Label Preview

Using the Preview function you can check the layout of the label before printing it onto the label.

1Press the key.

An image of the label is displayed on the screen. The length of the label is shown in the lower-right corner of the screen.

Press the or keys to scroll the preview to the left or right.

Press the or keys to change the magnification of the preview.

Press the

key to return to the text entry screen.

 

 

 

• To scroll the preview to the left or right end, hold down the

key and press the

 

or

 

 

keys.

 

 

 

 

To print the label directly from the preview screen, press the key or open the Print menu and select a print option. Refer to "Printing a Label" below for details.

The print preview is a generated image of the label, and may differ from the actual label when printed.

￿

LABEL PRINTING

Printing a Label

After entering the text and formatting the label, you are ready to print your label. In addition to printing a single copy of a label, your P-touch has several printing features that allow you to print multiple copies of a label, sequentially numbered labels and mirror-printed labels.

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape.

Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.

Be sure to check that there is enough tape remaining when printing several labels continuously. If tape is running low, set fewer copies or print labels one at a time.

Striped tape indicates the end of the tape cassette. If this appears during printing, press the key to turn the P-touch off. Continuing printing may cause damage.

Printing a Single Copy

1Make sure that the appropriate tape cassette is inserted and ready for printing.

1

2

3

4

5

6

7

8

9

Label Preview

43

Page 49
Image 49
Brother PT-18R manual Label Preview, Printing a Label, Printing a Single Copy