Functions
Ch. 3 Functions
To finish using the Auto Format function:
DPress or until 9 moves beside EXIT.
R12 3456789 A BCDEFK | ||||
R |
|
|
|
|
RG 02/04 PRINT |
|
| ||
RH MENU | PEXIT |
| Q | |
RI L | P |
|
| |
M |
|
|
| |
RJ AUTO | EDIT MORE |
| ||
1.10 | HELSINKI | A | AUTO | |
Length | Margin | Font | Width | Size |
EPress . The message “OK TO EXIT AUTO FORMAT?” appears in the display.
FPress . Any text displayed before the Auto Format function was used reappears in the display.
NOTE
☞The template that was last used appears first. Selecting this template displays the text that was entered in it at that time.
☞The label sizes are displayed in the currently selected unit of measurement (inches or centi- meters). The unit of measurement can be changed with the Setup functions. (Refer to page 80.)
☞An Auto Format template that has been stored in the memory can be recalled and used again. For details on recalling stored Auto format tem- plates, refer to page 73.
☞To quit the Auto Format function without using a template, hold down d and press 6 at any time.
☞The half cut can only be used to cut laminated tape.
Printing
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Layout Preview function (+ )
The Layout Preview function allows you to get a general overview of the text within the width of the currently installed tape. The length of the current label is indicated in the
To preview the label:
●Hold down and press .
NOTE
☞To scroll the label preview back and forth, press
or .
☞To return to the text at any time, press (OR hold down and press ).
R123456789 ABCDEFK | ||||||||
RG |
|
|
|
|
|
|
|
|
RH NO |
|
|
|
|
|
|
| |
R | L |
|
|
|
|
|
| Q |
RI M |
|
|
|
|
|
| ||
RJ 1.3 | 1.10 | HELSINKI | A | AUTO | ||||
| Length | Margin | Font | Width | Size | |||
Auto Cut function (+ )
Each setting of the Auto Cut function consists of settings for three different cut methods: full cut (which is used to completely cut off the label), half cut (which is used to cut laminated tape without cutting the label backing, making it eas- ier to remove the backing paper from labels), and chain printing (where the last copy is not cut off, reducing the amount of tape that is wasted).
Chain printing is an economical function designed to help eliminate “wasted tape” at the beginning of labels. Without chain printing, the usual leftover tape from the previous printing session is wasted before the first label in the cur- rent session is printed. However, if an Auto Cut setting using chain printing is selected, the last label in the previous session remains in the machine (is not fed out), so that the next label can be printed without wasting tape.
68
