![](/images/new-backgrounds/1120650/120650153x1.webp)
Mirror Printing function (+ )
This function prints your label so that the text can be read from the adhesive side of the tape. If
NOTE
When using the Mirror Printing function, the text should be printed on clear tape.
OFF
ON
When ON is selected, the Mirror Printing indi- cator at the top of the display comes on.
R12 345 6789 A BCDEFK | |||||
R |
|
|
|
|
|
RHG ON <<< |
| ||||
R | L |
|
|
| Q |
RI M |
|
|
| ||
| 1:_ |
|
|
|
|
RJ AUTO | 1.10 | HELSINKI | A | AUTO | |
| Length | Margin | Font | Width | Size |
To print a mirror image of the text:
1Hold down and press .
R12 345 6789 A BCDEFK | ||||||
RG |
|
|
|
|
|
|
R |
|
|
|
|
|
|
RH MIRROR |
|
|
|
|
| |
L |
|
|
|
|
| Q |
RI M OFF |
|
|
|
| ||
RJ AUTO | 1.10 | HELSINKI |
| A | AUTO | |
Length | Margin | Font | Width | Size |
2Press or until the desired setting is displayed.
NOTE
☞To return the function to its default setting (OFF), press the space bar.
☞To return to the text without changing the for- matting, press (OR hold down and press ).
3Press to apply the setting.
Ch. 3 Functions
Stamp Stencil function (+ )
The Stamp Stencil function allows you to quickly and easily create your own stamp sten- cil films for chemical etching. After inserting a stamp film cassette, select this function to adjust the text to a perfect thickness for the
To make a stamp:
1Type in the text, and then insert a medium (3/4"
2Hold down and press .
R123456789 ABCDEFK | ||||
RG |
|
|
|
|
R |
|
|
|
|
RH STAMP MODE |
|
| ||
L |
|
|
| Q |
RI M OFF |
|
| ||
RJ AUTO | 1.10 | HELSINKI | A | AUTO |
Length | Margin | Font | Width | Size |
NOTE
If a stamp is created using this function, be sure to use the Tape Length function to select left and right label margins of 1" (25 mm).
3Press or until the desired setting is displayed.
NOTE
☞To return the function to its default setting (OFF), press the space bar.
☞To return to the text without changing the set- ting for the Stamp function, press (OR hold down and press ).
4 Press . If ON was selected, the text is automatically adjusted for stamps.
5 Press to cut print resolution out of the stamp stencil film.
6After the stamp stencil film is cut off, remove the backing paper from the stamp stencil film and affix it to the ink pad of a stamp film holder. Refer to Assembling stamps on page 39.
Functions
65