![](/images/new-backgrounds/1120650/120650123x1.webp)
Functions
Ch. 3 Functions
To enter the barcode data:
1Hold down and press .
NOTE
☞To change the data or parameters of a barcode that has already been added to the text, position
the cursor below the right half of the barcode mark ( ) before holding down and press- ing .
☞To quit the Barcode function without adding a barcode, OR press at any time (hold down and press ).
R12 3456789 A BCDEFK | |||||
R |
| PARAMETER |
|
| |
|
|
| |||
RG |
|
|
| ||
RH CODE 39 |
|
|
|
| |
RI O∗∗ | N |
|
|
| Q |
RJ AUTO | 1.10 | HELSINKI | A | AUTO | |
Length | Margin | Font | Width | Size |
2Type in the new barcode data or edit the old data.
To change the barcode parameter settings:
3Press .
R12 3456789 A BCDEFK | ||||
R |
|
|
|
|
RG 01/04 |
|
|
| |
RH NO PROTOCOL |
|
| ||
L |
|
|
| Q |
RI M CODE 39 |
|
| ||
RJ AUTO | 1.10 | HELSINKI | A | AUTO |
Length | Margin | Font | Width | Size |
4Press or until the parameter that you want to change is displayed.
NOTE
☞To select the default setting, press the space bar.
☞To return to the barcode data without changing any parameters, press (OR hold down and press ).
5Press or until the desired setting is displayed.
6Repeat steps 4 and 5 until all parameters are set as you wish.
7Press .
To add special characters to barcodes (only with protocols CODE39 or CODE128):
8 Press or until the cursor is below the character immediately to the right of where
you want to add the special character.
9 Press | . |
|
|
|
|
R123456789 ABCDEFK | |||||
RG | 01/02 |
|
|
| |
R | L |
| 1 + |
|
|
RH M SYMBOL |
|
| |||
RI | O ∗∗N |
|
|
| Q |
R | 1.10 | HELSINKI | A | AUTO | |
J AUTO | |||||
| Length | Margin | Font | Width | Size |
0Press or until the special character that you want to add is displayed.
NOTE
Refer to page 99 for tables of the special characters that are available.
APress . The selected special character is added to the barcode data.
NOTE
☞To quit the Barcode function without adding a barcode, OR press at any time (hold down and press ).
To add the barcode to the text:
BPress .
NOTE
To delete a barcode, move the cursor either imme-
diately after the barcode mark ( ) or below the right half of the mark and press (OR move the
cursor below either half of the barcode mark ( ) and press ). When the message “OK TO CLEAR?
” appears, press . To return to the text with-
out deleting the barcode, press .
50