32Maintenance and Troubleshooting

4

Insert edge (A) of the cleaning sheet into the printing unit and guide it out to just in front of the cutter.

Do not remove part (A) of the cleaning sheet.

The printed side of the cleaning sheet should be facing upwards.

5

After inserting the cleaning sheet into the printing unit, push down the roll release lever and remove the B part of cleaning sheet.

To purchase a cleaning sheet, contact the retail outlet where the printer was purchased or your local authorized service center.

6 Close the DK Roll cover and turn ON the printer’s power.

7 Press the Feed button for more than one second.

The roller rotates for 100 mm.

 

The adhesive face of the cleaning sheet removes any

 

stains or dust on the roller.

 

If you do not press the Feed button for more than

 

one second, the roller rotates for only 8 mm.

 

Dispose the cleaning sheet after use.

Feed button

Label outlet maintenance

When glue is attached to the label outlet (metallic plate part and resin guide part) and the printer damages the label, pull out the power plug from the outlet and clean the label outlet with a cloth dipped into ethanol or isopropyl alcohol.

It is recommended to clean the label outlet when replacing the cutter unit.

Label outlet

Page 34
Image 34
Brother QL-560 manual Label outlet maintenance