Brother QL-560 manual Declaration of Conformity

Thank you for purchasing the QL-560.

This guide briefly describes the steps to start using your QL-560.

Refer to the Software User's Guide for more detailed information. The Software User's Guide can be found in the Manuals folder of the CD-ROM included with the QL-560.

We strongly recommend that you read this manual carefully before using your QL-560, and then keep it nearby for future reference.

We provide service & support for users who register their products on our website. We recommend that you take this opportunity to register with us by visiting us at:

Online User Registration

http://register.eu.brother.com/

Online Support Page

http://solutions.brother.com/

NOTE: It is also possible to access the above sites from the online user registration window of the CD-ROM installer disk which is included with the printer. We look forward to your registration.

	Declaration of Conformity
We	BROTHER INDUSTRIES, LTD.
	15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan

declare that the Labelling System QL-560 conforms with the following normative documents:

Safety:	EN60950-1:2001/A11:2004
EMC:	EN55022:1998/A1:2000/A2:2003 Class B
	EN55024:1998/A1:2001/A2:2003
	EN61000-3-2:2006

EN61000-3-3:1995/A1:2001

following the provisions of the Low Voltage Directive 2006/95/EC and Electromagnetic Compatibility Directive 89/336/EEC (as amended by 91/263/EEC and 92/31/EEC and 93/68/EEC). Issued by: BROTHER INDUSTRIES, LTD.

Quality Management Dept. Printing & Solutions Company

The enclosed interface cable should be used in order to ensure compliance with the limits for EMC.

Note: Marking is in compliance with EU Directive 2002/96/EC and EN50419.

This equipment is marked with the above recycling symbol. It means that at the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream. This will benefit the environment for all. (European Union only)