Brother QL-560 manual Safety precautions, „To use the machine safely, „The Printer

Safety precautions

Read all of these instructions and save them for later reference. Follow all warnings and instructions marked on the product.

Warning Tells you what to do to avoid the risk of injury.

Caution Tells you about procedures you must follow to prevent damage to the printer.

The symbols used in this manual are as follows:

Action NOT allowed to do	DO NOT disassemble the product.
DO NOT splash the product with or	DO NOT touch a given portion of the
immerse the product in water.	product.
Mandatory action	Unplugging
Alerts to the possibility of electrical
shock

„To use the machine safely

Warning

Follow these guidelines to avoid fire, electric shock, or other damage.

3

Introduction

STEP

1

Getting started

STEP

2

to your PC For Windows

„The Printer

Unplug the power cord immediately and stop using the printer during an electrical storm. There may be a remote risk of electric shock from lightning.

Do not touch any metal parts near the print head. The print head becomes very hot during use and remains very hot immediately after use. Do not touch it directly with your hands.

Dispose of plastic bags correctly and keep away from babies and children. Do not wear or play with plastic bags.

Unplug the power cord immediately and stop using the printer if you notice any abnormal odor, heat, discoloration, deformation or anything unusual whilst the printer is in use or storage.

Do not disassemble the printer.

For inspection, adjustment and repair of the printer contact the retail outlet where the printer was purchased or your local authorized service center.

Do not drop, hit or otherwise bang the printer.

Do not hold and lift the printer by the DK Roll cover. The cover could come off and the printer could fall and become damaged.

Do not allow the printer to get wet in any way.

Do not use the printer with foreign objects in it. If water or any foreign objects should enter the printer, unplug the power cord from the electric outlet and remove the foreign object. If necessary, contact the retail outlet where the printer was purchased or your local authorized service center.

Connecting For MAC

STEP

3

Creating a label

STEP

4

Maintenance and Troubleshooting