Check or Request number (N)
The short cut is interrupted and you can enter a number of your choice. When you have confirmed the number press the OK button the short cut continues processing.
Request acknowledgement (Q)
The short cut is interrupted to allow you to hear the dial tone, for example. When you have confirmed press the NEXT button the short cut continues processing.
Base messages (B)
The short cut is interrupted to display messages from the base station and to enter digits (e.g. when the internal number is requested). When you have confirmed press the NEXT button the macro continues processing.
The table below shows some of the default short cut names, content and explanation
Name | Content | Explanation |
|
|
|
Base lock | S#24CBS | Short Cut |
|
| (Switch the |
|
| base station |
|
| lock on and |
|
| off) |
|
|
|
Base ringer | S#*5BS | Short Cut |
volume |
| (Adjust the |
|
| base station |
|
| ringer volume) |
|
|
|
Call barring | S#84CB0S | Short Cut |
OFF |
| (Switch dial |
|
| lock off) |
|
|
|
Call barring | S#84CB1S | Short Cut |
ON |
| (Switch dial |
|
| lock on) |
|
|
|
Using the “Call Barring on” short cut will do the following for you
SET # | TUV | GHI | OK | 1 |
8 | 4 |
•Press the SET button.
•Press the # button followed by the 8 and 4 buttons.
•Request a PIN number. The user will have to enter the PIN number and OK it.
•Press the 1 button. This will activate the function.
•Press the SET button.
If doing the above manually you would have to press the menu button to display the main menu then highlight SERVICE to display SET after which the SET and INT buttons have to be pressed before the above steps can be carried out.
To use a short cut
You can use a short cut while the phone is in standby.
|
|
| - | – |
▼ | ▲ | OK | – | |
| ||||
|
|
| ||
•Press the MENU button.
•Use the UP or DOWN option to highlight SHORT CUT.
•Press OK. A list of short cut names are displayed.
•Use the UP or DOWN option to highlight the short cut you want.
•Press the MORE OPTIONS button.
•Use the UP or DOWN option to highlight START.
•Press OK. The short cut sequence will start automatically. It will prompt the user for the pin number or number as required.
19
