Diverse 3010 Executive 22/3/01 12:02 pm Page 6

Diverse 3010 Executive – Edition 4 – 22 November ’00 - 3509

Setting up

SETTING UP

Follow these steps to get your Diverse 3010 Executive ready for use

Your handset is already “registered” to the Diverse 3010 Executive base station.

Note

Plan where you will put your Diverse 3010 Executive. It should be within two metres of a power socket and the phone socket.

1Connect the power cable

Plug the power cable into the power socket on the underside of your Diverse 3010 Executive. The power cable connector is coloured red. Please take care that the telephone cord and power cable plugs are connected to the correct socket as incorrect placement could damage the base station.

WARNING

It is recommended that the telephone line cord is not connected until the handset is fully charged. This will prevent the risk of the phone being answered prior to the batteries being fully charged and therefore not achieving their optimum capacity.

2Plug the 3 pin adaptor into a mains power socket and switch on

Note

Use only the power adaptor

C39 280-Z4-C174/..–C67 with your Diverse 3010 Executive.

Red socket

6

Page 10
Image 10
BT 3010 Executive manual Setting up, Connect the power cable