BT 900 manual OLD PIN - - . default

Setting your own base station PIN code

You can set your own four-digit code number for your Synergy 900 base station. This prevents unauthorised users from registering or de-registering handsets on your Synergy 900 base station.

•Press the ➔button until the display shows SET UP.

•Press the ✔ button. Display shows HANDSET.

•Press the ➔ button. Display shows BASE.

•Press the ✔ button. Display shows SECURITY PIN.

•Press the ✔ button. Display shows

OLD PIN - - - - . (default 0000).

•Enter the current PIN code (default 0000). The - - - - marks disappear one by one. The entered numbers are not displayed.

•Press the ✔ button. Display shows

NEW PIN - - - - .

•Enter the new PIN number. The - - - - marks disappear.

•Press the ✔ button. Display shows

NEW PIN - - - - again. Re-enter the new PIN number, so that the base station can check that there was no mistake on entering the PIN.

•Press the ✔ button.

•The display shows OK. You hear a confirmation beep. The display then changes to HSET 1.

Keep a record of your PIN number in the boxes on the fold-out page at the front of this guide.

19