Warning
1.Use only the approved battery pack supplied. Spare batteries – Item Code: 871285 are available from BT Shops and the Synergy Helpline
0845 650 20 20.
2.Do not try to use any power supply except the one provided, otherwise you may permanently damage your Synergy 900. It may also invalidate approval of this apparatus. To get a replacement Synergy charger power supply unit (Item Code: 871273) and Synergy base station power supply unit (Item Code: 871340) contact BT Shops or the Synergy Helpline 0845 650 20 20.
3.There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug your Synergy 900 from the mains power and telephone line socket during storms.
4.If you wear a hearing aid, please note that the Synergy 900 works by sending radio signals between the base station and handset. These signals can interfere with hearing aids, causing a humming noise.
5.Synergy 900 can interfere with other electrical equipment, e.g. answering machines, TV and radio sets, clock radio/alarms and computers if placed too close. It is recommended that you place your Synergy 900 at least one metre away from such appliances to avoid any risk of interference.
The Synergy 900 system has a range of up to 300 metres outdoors and up to 50 metres indoors. It is possible that the range may be affected by being near water (e.g. large ponds, lakes, the sea) and large metal objects (e.g. radiators, steel girders and metal partition walls).
6.The Synergy 900 will produce a certain amount of heat during operation. Equally, the handset as well as any additional chargers you purchase can also become warm during charging.
7.We advise against placing these products on antique, veneered or wooden surfaces as damage may occur.
8.Do not use the Synergy 900 in damp, humid conditions such as bathrooms. Do not expose the equipment or batteries to fire or water.
9.Do not dispose of used batteries with general household rubbish and do not burn them.
10.Do not use the handsets in places where there are explosive hazards.
11.Make sure you connect the power and telephone lines to the correct sockets in the base station.
12.Clean the handset and base station with a damp (not wet) cloth or antistatic wipe.
Never use a dry cloth as this may cause a static shock. Never spray cleaning fluid directly onto the telephone.
5
