BT Digital Cordless Telephone manual Your BT Elements phone is ready for use

Elements – New Style – Edition 4 – 31.08.06 – 7644

10 Getting started

IMPORTANT

Before you wall mount, please check that:

•you are not drilling into any hidden wiring or plumbing

•the mains power adaptor will reach the plug socket

BT are not responsible for any damage / injury caused while attempting to wall mount your phone.

3

8

50

2.Insert the wall plugs provided into the holes and then insert the 2 screws, one into each hole. Leave a gap between the head of the screw and the wall (approx 3mm).

3.Thread the power cable from the charger through the hole in the bracket and thread the cable into the cable groove on the underside. Secure the charger onto the bracket by screwing the 3 screws supplied into the underside of the bracket.

4.Fix the bracket (now with charger attached to it) onto the screws protruding from the wall, by placing it over the screw heads then pull it down gently and it should drop down and secure into place.

Your BT Elements phone is ready for use

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com