BT Digital Cordless Telephone Using additional handsets, Registering a new BT Elements handset

Elements – New Style – Edition 4 – 31.08.06 – 7644

Using additional handsets 53

You can use up to five GAP compatible handsets with your BT Elements base to extend your phone system without needing to install extension sockets for each new phone.

Your BT Elements handset can be registered to up to 4 bases. You can then select the base you would prefer

to use.

You need to register any additional handsets you purchase to your BT Elements base.

Registering a new BT Elements handset

At the base:

1.Press and hold until you hear a beep, then release it.

The base will now remain in registration mode for 90 seconds, during which time you will need to complete the following procedure.

At the new handset:

2.Press Menu to open the main menu.

3.Press or until Register is displayed, then press Menu .

4.Press or to highlight Reg Base and press Menu .

5.Enter a base number (from 1 to 4) and press Menu .

Additional handsets must be fully charged before attempting to register.

If the handset is already registered to a base, the base number will flash.

The default PIN code is 0000.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com