Registering a new Diverse 2000 Additional Handset with the base station
Up to six handsets can be registered and operated from the Diverse 2010 base station. The system allows you to make internal intercom calls between two handsets while a third is making an external call.
Each additional handset you purchase must be registered at the base station.
To register a handset
The handset must be switched OFF.
At the base station:
•Press and hold down the grey paging button until you hear the continuous beeps (after about
Diverse handsets | Item Code | |
Diverse 2000 |
|
|
Additional Handset | Ð | 871171. |
Diverse 2000 |
|
|
Executive Handset | Ð | 871172. |
Diverse 2000 Charger | Ð | 871173. |
Please note – Diverse 2000
handsets will not work on Diverse
1000 base stations.
Diverse 2000 Handsets are only compatible with Diverse 2000 Chargers.
If you are registering a Diverse 2000 Executive Handset follow the instructions in the Diverse 2000 Executive Handset user guide.
You now have up to 1 minute to register the handset, during which the beeps will continue.
At the handset:
1 PWR #
•Press and hold down the 1 button together with the PWR button until the display shows 1 – and flashing 
.
•Enter the 4 digit system code (default 0000).
•Press the # button. The beeps stop after about 10 seconds, and the display shows all the available handset numbers.
•Select and enter one of these numbers. This is now the handset’s internal number and it is registered with the base station.
26
