Using your Diverse 2010 with a switchboard
Your Diverse 2010 can be connected to all compatible switchboards. For a list of suitable switchboards, phone the Diverse Helpline on 0345 908070.
Entering access codes
When you use your telephone on a switchboard you may need to program a delay for switching calls through to external lines. You can set this delay to be inserted automatically when you dial the switchboard access number, before the remainder of the number is dialled. For example, if your switchboard access number is 9, when you set your access delay to 9 the pause before dialling would happen automatically every time you dial 9 as a first digit. This allows your switchboard enough time to allocate you an outside line.
Access codes can be up to three digits long (select your codes from any number between 1 and 9, plus ✱ and # buttons).
Your Diverse 2010 can store up to three switchboard access codes.
To insert an access code
The handset must be switched ON.
| # | 0 |
| WXYZ |
STO | LNR | 9 | ||
|
|
|
•Press the STO button.
•Press the # button.
•Press the 0 button.
•Enter the system code. (Standard setting is 0000.)
•Press the LNR button (you need to press the LNR button twice for a satellite PBX system).
•Enter the access code you want to use (for example ‘9’). If you want to enter additional access codes, press the LNR button again, followed by the next code, and so on.
•Press the STO button to confirm.
Notes:
You can enter up to three switchboard access codes. You may find it useful to enter 144 (for BT Chargecard access) as one of the access codes, together with an access pause of six seconds Ð see ÔSetting the access pauseÕ on the following page.
24
