Unless the chosen network is open, you will need to enter the encryption key (password) for the wireless network.

Input the WEP (hex) or WPA Personal (alphanumeric) key into the key field. Highlight the key field, press the remote’s ENTER key, type the key in, and press ENTER again when finished. Use the 0-9 keys in sequence to type numbers and letters into the field (similar to how a cell phone works). For capital letters, please cycle through the lower case and numbers first. The left arrow key is used for backspace, the right arrow key for space.

Select Continue when done.

Press the right arrow to have DHCP automaticly configure your network settings (recommended). If you select ‘Enter the Settings (Static Address)’ then you will have to set your IP address and subnet mask manually.

22

Page 22
Image 22
Buffalo Technology P4LWAG manual