TROUBLESHOOTING (cont.) |
|
|
|
|
BREWING CIRCUIT (cont.) |
|
|
|
|
PROBLEM |
| PROBABLE CAUSE |
| REMEDY |
Dripping from sprayhead |
| 1. Lime build up |
| Inspect the tank assembly for ex- |
|
|
|
| cessive lime deposits. Delime as |
|
|
|
| required. |
|
| 2. Dispense valve |
| Remove the dispense valve and clear |
|
|
|
| any obstructions. Rebuild or re- |
|
|
|
| place the valve if necessary. (See |
|
|
|
| page 24) |
Weak beverage |
| 1. Sprayhead |
| A |
|
|
|
| must be used for proper extraction. |
|
| 2. Water temperature |
| Place an empty brew funnel on an |
|
|
|
| empty decanter beneath the spray- |
|
|
|
| head. Initiate brew cycle and check |
|
|
|
| the water temperature immediately |
|
|
|
| below the sprayhead with a ther- |
|
|
|
| mometer. The reading must not be |
|
|
|
| less than 195°F (91°C). Adjust the |
|
|
|
| temperature setting to increase the |
|
|
|
| water temperature. Refer to Initial |
|
|
|
|
3.Filter type
4.Coffee grind
5.Funnel loading
BUNN® paper filters must be used for proper extraction.
A fine drip or grind must be used for proper extraction.
The BUNN® paper filter must be centered in the funnel and the bed of grounds leveled by shaking gen- tly.
Page 19 | 29707 112801 |
|
