Bunn LPG-2, G9WD, G2 TRIFECTA, G9-2 SERVICE Cont, MOTOR Models LPG & FPG, Lay motor on it’s side

Models: FPG-2 G9-2T DBC G9-2 G2 TRIFECTA G9 G9WD LPG-2

1 79
Download 79 pages 39.46 Kb
Page 23
Image 23
11.Lay motor on it’s side.

SERVICE (Cont.)

MOTOR (Models LPG & FPG)

8.Remove spacer plate (3) and set aside for reas- sembly.

9.Lift solenoid bracket and solenoids (4) over the motor and burr housing assembly (6) and set aside for reassembly.

10.Remove the #8-32 setscrew (5) and set aside for reassembly.

11.Lay motor on it’s side.

NOTE: Refer to Fig. 14 for the disassembly and assembly of the burrs and rotor.

12.Remove the two #10-32 fillister head screw securing burr housing cap (10) to the burr housing.

13.Remove cap, burr adjusting screw, decaffing plate and decaffer support (10) as an assembly. Set aside for reassembly.

14.Remove load disc (11) and set aside for reassem- bly.

15.Slide rotor (12), lower burr (13) and spring (14) as an assembly off the motor shaft, set aside for reassembly.

16.Remove burr housing divider (8) and set aside for reassembly.

NOTE: Inspect rotor. If rotor needs to be replaced, remove the two #10-32 binding head screws securing lower burr (13) to the rotor and remove burr. Install lower burr (13) on new rotor (12) using two #10-32 binding head screws.

17.Slide spring retaining bushing (15) off the motor shaft and set aside for reassembly.

18.Remove the two #10-32 binding head screws secur- ing the upper burr (16) to the motor and housing assembly (17).

19.Remove the upper burr (16) and set aside for reas- sembly.

NOTE: If burrs need to be replaced, they must be re- placed in matched pairs.

 

1

 

2

 

3

2

4

 

 

5

6

 

 

P1050

 

FIG. 11 SOLENOID AND GATES

1.Retaining Ring W/Hopper Gasket

2.Slide Plate, Solenoid Plunger and Spring

3.Spacer Plate

4.Mounting Ring, Solenoid and Solenoid Mounting Plate

5.Setscrew, #8-32

6.Motor and Burr Housing

23

41545 122209

 

Page 23
Image 23
Bunn LPG-2, G9WD, G2 TRIFECTA, G9-2T DBC, FPG-2 SERVICE Cont, MOTOR Models LPG & FPG, Lay motor on it’s side