OPERATING CONTROLS
P1626 |
(CDBC models)
ON/OFF SWITCH
Pressing the "ON/OFF" switch (indicator glowing) supplies power to the brew station warmer, enables the brew circuit, and energizes the tank refill circuit. Pressing the switch again (indicator not glowing) stops tank refilling and brewing and deenergizes the brew station warmer. Stopping a brew cycle after it has been started will not stop the flow of water into the decanter until the funnel is empty.
NOTE Ð Hot water will be available at the faucet in a limited amount when the "ON/OFF" indicator is not glowing because the tank will not refill.
TEMP |
P 2642 |
(SINGLE CD models)
BREW SWITCH
Momentarily pressing and releasing the switch starts a brew cycle when the "ON/OFF" indicator is glowing.
NOTE Ð The "ON/OFF" indicator must be glowing to initiate and complete a brew cycle.
BATCH SLECTORS (SINGLE CD only)
Pressing a batch size switch (1/2 gal. or 1 gal.) so the indicator is glowing will set the brewer to deliver the desired brew volume.
ADDITIONAL WARMER SWITCHES (CDBC only)
Pressing any additional warmer switch so that the indicator is glowing, supplies power to the associated warmer.
READY INDICATOR
This indicator glows when the preset temperature has been achieved. The word "NOT" above "READY" will glow in all other instances.
TEMPERATURE INDICATORS
The indicator glows to communicate the brew water tempera- ture setting. Two indicators will glow when the temperature is between them.
Page 5 | 35582 041503 |
|
