BORE SIGHTING
Bore sighting is a preliminary procedure to achieve proper alignment of the scope with the rifle bore. It is best done using a Bushnell Bore Sighter. If a bore sighter is not available, it can be done as follows: Remove the bolt and sight through the gun barrel at a 100 yard target. Then sight through the scope and bring the crosshairs to the same point on the target.
SIGHTING IN RIFLE AT THE RANGE
-Remove the elevation cap. If the standard elevation turret is not installed, remove the BDC turret and install it. This is done by using a coin to unscrew the retaining screw in the center of the turret. Grasp knurl at top of the Turret and lift upward, disengaging turret from the elevation adjustment pin. Reverse to install a new turret.
-
-Once the rifle is
(NOTE: When the selected BDC turret is installed, the elevation cap cannot be used. If the standard elevation turret is installed, the cap can be threaded onto the scope).
POPULAR CAILBER & LOAD COMBINATIONS | BALLISTIC | |
|
| GROUP |
Federal Cartridge.224 dia. | G | |
Federal Cartridge.224 dia. | F | |
|
|
|
Remington Arms | .224 dia. | H |
Remington Arms | .224 dia. | G |
|
| |
Winchester .224 dia. | H | |
Winchester .224 dia. | G | |
|
|
|
Federal Cartridge | .277 dia. 270 Win, 150 gr. Ballistic Tip at 3060 fps | F |
|
|
|
Federal Cartridge | .277 dia. 270 Win, 150 gr. Partition at 3000 fps | F |
Remington Arms | .277 dia. 270 Win, 140 gr. PSPCL Ultra at 2925 FPS | E |
|
|
|
Remington Arms | .277 dia. 270 Win, 150 gr. SPCL at 2850 FPS | D |
Winchester .277 dia. 270 Win, 150 gr. Partition Gold at 2930 FPS | E | |
|
| |
Winchester .277 dia. 270 Win, 150 gr. | E | |
Federal Cartridge | .308 dia. | D |
|
|
|
Federal Cartridge | .308 dia. | D |
Remington Arms | .308 dia. | D |
15 | 16 |