Cabletron Systems BRIM-WT1 manual To configure an Interface Number

THE WAN INTERFACE CONFIGURATION SCREEN

STATE

Displays the status of the bridge port. This field is specific to the Frame Relay protocol. If the active protocol is Frame Relay, this field displays the status as ACTIVE or INACTIVE. If the active protocol is PPP, this field appears empty.

Configuring Interfaces

The BRIM-WT1 Local Management Automatically assigns bridge ports to interfaces. There are 31 Bridge Ports available.

To configure an Interface Number:

1.Use the arrow keys to highlight the Interface Number field.

2.Press the Return key to select the Interface Number (02-26) you want to configure.

3.Use the arrow keys to highlight the Active Protocol field.

4.Press the Return key to select PPP, FR, or NONE.

-Select PPP or FR to assign a Bridge Port

-Select NONE to remove a previously assigned Bridge Port

5.Use the arrow keys to highlight the SAVE command.

6.Press the Return key or press F6. The message “Save Done!” appears. The BRIM-WT1 Local Management automatically assigns an Active Port Number to the Interface number and the changes are saved to memory.

BRIM-WT1 USER’S GUIDE Page 17