Cabletron Systems manual Chapter, DELHE-UA LEDs

CHAPTER 3

LANVIEW LEDs

This chapter describes how to use the LANVIEW LEDs to monitor the DELHE-UA status and diagnose DELHE-UA problems.

3.1DELHE-UA LEDs

Refer to Figure 3-1 for the location of the DELHE-UA LEDs and Table 3-1 for a description of the LED indications.

FEPIM 1 FEPIM 2 DELHE-UA

SP

Receive (RX) Transmit (TX)	Receive (RX) Transmit (TX)
LEDs for FEPIM 1	LEDs for FEPIM 2

Figure 3-1 DELHE-UA LANVIEW LEDs

The terms flashing, blinking, and solid used in Table 3-1 indicate the following:

Flashing indicates an irregular LED pulse.

Blinking indicates a steady LED pulse (approximately 50% on and 50% off).

Solid indicates a steady LED light. No pulsing.

DELHE-UA User’s Guide 3-1