Chapter 2: Installation
Module
Module
Connector
Rear
Standoff
10 100
Connector
Front
Standoffs
feinstall
Figure 2-2 Installing the FEPIM
4.Press down firmly on the FEPIM until the pins slide all the way into the
5.Secure the FEPIM using the screws enclosed in the FEPIM packaging. The screw used to attach the rear of the FEPIM to the standoff is optional and not necessary for proper installation. Refer to Figure
If SC protective covers were removed from a fiber FEPIM, replace the covers until the port is connected to the network to reduce the chance of dust and contaminants entering the port.
