Source Addressing
2.Click mouse button 1 on ; the Channel X Source Address List window, Figure
3.In the Hash Type field, click mouse button 1 on the appropriate selection to apply Dec or nonDec hashing to all ports on the selected repeater channel.
4.Click mouse button 1 on to save your changes; click on
to exit the window.
NOTE |
If your SEHI firmware does not support the Hash Type feature, this field will be unavailable.
Locking Source Addresses
When Source Address Locking is enabled, it puts into place a number of security measures designed to protect your Stack from unauthorized access. Depending on the revision of firmware installed on your SEHI and the kinds of Modules in the STACK, locking ports can provide a number of different protections, including secure address assignment, trunk port locking, configurable violation response, both eavesdrop and intruder protection,
Enabling port locking from the Source Address List window activates all applicable security protections, as configured via the Security application (described in Chapter 5 of this guide).
NOTE |
Since the
To enable or disable Source Address Locking:
1.Click mouse button 1 on the appropriate option in the Source Address Lock field.
2.Click mouse button 1 on to set your new lock status.
Locking Source Addresses |