Security
displayed in the list box; a repeater whose ports have different Security Mode or Trap settings will display a status of “Mismatch.”
Figure 6-6. Channel A Module Security Window
3.Use the Set Security For field or the mouse to select the hub or hubs for which you wish to configure security (note that the settings in theSet Security For field will change automatically as you click to select or
4.In the Security Mode field, click mouse button 1 on the appropriate selection to apply Full or Continuous lock status to all ports on the selected hubs, or to Unlock all ports on the hubs. (Note that if your SEHI does not support the newest security enhancements, the Continuous selection will be unavailable.)
5.Click on the appropriate selection in the Send Trap field toEnable or Disable traps for the selected hub(s).
6.Click on 
to save your changes; each hub’s current status will be
displayed in the scroll list. Click on 
to exit the window.
Port-level Security and Traps
To enable or disable security and/or traps at the port level:
Enabling Security and Traps |
|
