Cabletron Systems SEHI-32/34, SEHI-22/24 manual 5-12, Source Addressing, To find a source address

Source Addressing

NOTE

Note that each repeater channel maintains its own Source Address Table, and they are completely independent of one another; therefore, if you search for a source address communicating via Channel B from the Channel A Source Address List window, the result will be a “not found,” even though the address is connected to a port in the SEHI- controlled hub.

To find a source address:

1.Click mouse button 1 on in the Source Address List window (Figure 5-2, page 5-3); the Find Source Address window, Figure 5-5, will appear.

Figure 5-5. Find Source Address Window

2.In the MAC Address field, enter the source address you wish to locate in a hexadecimal (XX:XX:XX:XX:XX:XX) format.

3.Click on . If the address is in the table at the time the search is initiated, the remaining fields in the window will display the module and port through which the address is communicating with the SEHI. If the address is not in the table, the message MAC Address Not Found will display in the window. See Figure 5-6, page 5-13.

5-12 Finding a Source Address