Link/Seg Traps
Figure 3-3. The Module Traps Window
3.In the Module Traps window, click mouse button 1 to select the module for which you wish to configure link and segmentation traps. If theSet Trap Status For field displaysSelected Modules (the default setting), you can click to select any modules; to
4.Click on the appropriate selection in the Link Traps field toEnable or Disable link traps for the selected modules, as desired.
5.Click on the appropriate selection in the Segmenting Traps field toEnable or Disable segmenting traps, as desired.
6.Click on 
to save your changes; click on 
to exit the window.
Viewing and Configuring Link/Seg Traps for Ports
To enable or disable Link and Segmentation traps for individual ports:
1. In the Repeater Link/Seg Traps window, select a repeater in the scroll list.
Enabling and Disabling Link/Seg Traps |
