Cabletron Systems SEHI-32/34 5-10, Source Addressing, 3. The Module Source Address Traps Window

Source Addressing

Figure 5-3. The Module Source Address Traps Window

To enable or disable port-level traps:

1.In the Port Source Address Traps window (Figure 5-4, page 5-11), click mouse button 1 to select the port or ports for which you wish to enable or disable traps. If the Set Trap Status For field displaysSelected Ports (the default setting), you can click to select any ports; to de-select any highlighted port, click on it again. If the selection All Ports On Module is displayed in the Set Traps Status For field, you can select only one port at a time; trap status will be set for all ports on the same module as the selected port. If the selection All Ports on Repeater is displayed in the Set Trap Status For field, all available ports will be automatically selected; if you de-select any port, the Set Trap Status For field will automatically revert to theSelected Ports setting. To change the setting in the Set Trap Status For field, click mouse button 1 on the currently displayed setting, and drag down to select a new setting.

5-10 Configuring Source Address Traps