Security
Figure 6-5. Channel A Security Window
3.In the Security Mode field, click mouse button 1 on the appropriate selection to apply Full or Continuous lock status to all ports on the selected repeater channel, or to Unlock all ports on the channel. (Note that if your SEHI does not support the newest security enhancements, the Continuous selection will be unavailable.)
4.In the Send Trap field, click mouse button 1 on the appropriate selection to Enable or Disable traps for the selected repeater channel.
5.Click mouse button 1 on 
to save your changes; the new status will be displayed in each field to the right of the field name. Click on 
to exit the window.
Hub-level Security and Traps
Locking ports at the hub level applies all applicable protections (as configured via the Port Security window) to each port on the selected hub or hubs.
NOTE |
If you select a group of hubs whose ports have different security capabilities, you may still be able to select and apply security states which are not applicable to all ports. Applying these kinds of settings will have no adverse affect on your network devices: those ports which can accept the set will do so; those which cannot will either ignore the set or issue a Set Failed.
To enable or disable locking and/or traps at the hub level:
1.In the Repeater Security window, click to select the appropriate repeater interface in the scroll list.
2.Click mouse button 1 on 
; the Channel A Module Security window, Figure
| Enabling Security and Traps |
