Chapter 7: Local Management
7.7.2Exiting the Trap Table Screen
Use the following steps to exit the Trap Table screen and return to the Feature Selection screen:
1.Press the appropriate Function key. To exit to the Feature Selection screen, use the arrow keys to highlight the RETURN command.
2.Press ENTER. The Feature Selection screen appears.
7.8THE SNMP TOOLS SCREEN
This section describes how to use the SNMP Tools screen to access Management Information Bases (MIBs). Access to screen options depends on the access status accorded to the user’s community name. This section describes
SNMP Tools allows access to valuable MIB information. The user gets information about specific object identifiers (OIDs), edit the values of configurable OIDs, and request the OID numerically sequential to the originally requested OID.
Other ways to view OIDs from the SNMP Tools screen include Walking, Stepping, and Cycling. Walk and Cycle let the user review several OIDs at a time.
To access the SNMP Tools screen from the Feature Selection screen, use the arrow keys to highlight the SNMP Tools Support option, then press ENTER or F9. The SNMP Tools screen shown in Figure
SEHI100TX User’s Guide |