Cabletron Systems SEHI100TX-22 manual Editing the Community Name Field

The Community Name Table Screen

7.5.1Editing the Community Name Field

The password used to access Local Management at the Password screen must have Super-User privileges for the edits to take effect. If a password is entered with Basic-Read, Read-Only, or Read-Write privileges, Local Management displays the message “AUTHORIZATION PROHIBITS ACCESS”, and does not include editing capabilities.

Use the following steps to edit the Community Name field:

1.Use the arrow keys to highlight the Community Name field adjacent to the desired access level.

2.Enter the community name (maximum of 32 characters) into the field.

3.Press ENTER.

4.Repeat steps 1 through 3 for editing any of the other community names.

5.Use the arrow keys to highlight the SAVE command at the bottom of the screen, then press ENTER or F6. The “SAVED OK” message appears indicating that the edits have been saved to memory.

NOTE

The first time a user attempts to exit the screen without saving the changes, a “NOT SAVED?” message is displayed. The edits are lost if the user proceeds to exit without saving the changes.

6.To exit the screen, press the appropriate Function key or use the arrow keys to highlight the RETURN command.

7.Press ENTER. The Feature Selection screen appears.

SEHI100TX User’s Guide 7-11