The SNMP Tools Screen
7.8.6Stepping Through OIDs
Use the following steps to STEP through OIDs (the user can step through only after a GETNEXT):
1.Highlight STEP, using the arrow keys, then press ENTER. “Specify OID” appears.
2.Enter the OID (only the suffix is necessary) and press ENTER. The Tools screen begins to scroll one OID at a time, through all of the sublayers of the MIB available for that OID.
7.8.7Cycling Through OIDs
Use the following steps to CYCLE through an OID:
1.Use the arrow keys to highlight CYCLES, then press ENTER.
2.Enter the number of cycles desired to occur after “ENTER CYCLE COUNT:”, then press ENTER.
3.Enter how many seconds delay desired between get next requests after “ENTER CYCLE DELAY (secs):”, then press ENTER.
7.8.8Repeating the Last OID
Use the following steps to continuously REPEAT an OID for monitoring purposes:
1.Use the arrow keys to highlight CYCLES, then press ENTER.
2.Enter the OID to be repeated and press ENTER.
3.The GET command for the OID is repeated so the OID is repeatedly displayed along with a running count at regular intervals. Press the SPACE bar to stop the process.
7.8.9Exiting the SNMP Tools Screen
To exit the SNMP Tools screen:
1.Use the arrow keys to highlight the RETURN command.
2.Press ENTER. The Feature Selection screen appears.
SEHI100TX User’s Guide |
