Cabletron Systems TRFMIM-28 manual Setting the Module DIP Switch

Installing the 9H423-28 Module

SMB1 Prom

Boot Prom

St

Dip

Switches

Flash

DRAM

CNXSTATS

Connector

Figure 2-2. User Accessible Components

Setting the Module DIP Switch

The DIP switch on the 9H423-289 module (Figure 2-2 ), is an eight-switchDIP located near the right and center of the module. Each switch is set according to the functions described in Table 2-1. If switch settings are changed, the processor on the module must be reset, using the reset switch or repowering the module, for changes to take effect.

2-3