Cabletron Systems WPIM-RT1 manual Full T1 Configuration Using PPP

Full T1 Configuration Using PPP

3.3FULL T1 CONFIGURATION USING PPP

This section provides step-by-step instructions for configuring the WPIM-RT1 to use a full T1 circuit in a PPP environment. This simplified example assumes the setup shown in Figure 3-6using a CSX400 with a WPIM-RT1 installed at Site #1. Configurations may vary depending on the host platform.

SITE #1

Telco Cloud

24 Timeslots

Figure 3-6 Full T1 Configuration

SITE #2

24 Timeslots

1482_05

The line configuration information shown in Table 3-1must be supplied by the service provider.

Table 3-1 Telco Configuration Information

Configuration Information	Configuration Information
Required by User	Supplied by Service Provider
Line Coding	B8ZS or AMI
Frame Type	ESF or D4
Clock Source	Loop Timing or Local Timing

WPIM-RT1 User’s Guide 3-11