Cabletron Systems WPIM-RT1 manual Displays the next interface available to be used

The WAN Physical Configuration Screen

2.Use the SPACE bar to select the appropriate WPIM, then press ENTER. The WAN Configuration screen automatically displays unique configuration fields for each WPIM as shown in Figure 3-1.

The WAN Physical Configuration screen displays the following information for each WPIM:

WPIM 1-2(Read-Only)

Displays configuration information for up to two different WPIMs.

Type (Read-Only)

Displays the type of WPIM installed. For the WPIM-RT1, the Type field displays T1, for T1 service.

WPIM # (Read-Only)

Displays the number of the slot in which the WPIM resides.

Mgr Type (Selectable)

Used to select the type of protocol manager. The available options are PPP, FR PtoMP, FR PtoP, HDLC and NONE. The field defaults to NONE.

Max VCs (Modifiable)

Displays the maximum number of virtual circuits (interfaces) available to be configured. The default number displayed depends on the Protocol Manager chosen.

Next IF (Read-Only)

Displays the next interface available to be used.

SAVE (Command)

Saves the chosen configuration.

[WPIM X] (Toggle)

Enables the user to select the WPIM to be configured. Once it is selected, the user can enter the screens of the WPIM selected to modify the data.

WAN INT CONFIG (Command)

When this field is highlighted and the ENTER key is pressed, the WAN Interface Configuration screen displays. Refer to Section 3.2 for details.

REMOTE SETUP (Command)

Used to access and modify remote profiles information.

RETURN (Command)

Returns user to the previous screen in the hierarchy.

WPIM-RT1 User’s Guide 3-3