APPENDIX B
FCC PART 68 - USER’S INFORMATION
The following instructions are provided to ensure compliance with the Federal Communications Commission (FCC) Rules, Part 68.
1.This device must only be connected to the ISDN Basic Rate network behind an FCC Part 68 registered channel service unit. Direct connection is not allowed.
a.All direct connections to T1 lines must be made using standard plugs and jacks.
b.All direct connections to DDS lines must be made using standard plugs and jacks.
2.Before connecting your unit, you must inform the telephone company of the following information:
Port ID | REN/SOC | FIC | USOC |
|
|
|
|
|
|
|
|
6.0N | RJ48C | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.If the unit appears to be malfunctioning, it should be disconnected from the telephone lines until you learn if your equipment or the telephone line is the source of the trouble. If your equipment needs repair, it should not be reconnected until it is repaired.
4.If the telephone company finds that the equipment is exceeding tolerable parameters, the telephone company can temporarily disconnect service, although they will attempt to give you advance notice if possible.
|
