Cal Flame A726L, A734B, A515 Allow for service access, Outdoor equipment pack in-groundspas only

Models: A526 A726L A726B A534 A734L A515 A734B

1 32
Download 32 pages 61.6 Kb
Page 5
Image 5
Allow for service access

Allow for service access

Many people choose to install a decorative structure around their spa. If you are installing your spa with any type of structure on the outside, such as a gazebo, remember to allow access for service. It is always best to design special installations so that the spa can still be accessed.

Outdoor equipment pack (in-ground spas only)

The Designer Spa series requires an external equipment pack. When locat- ing the outdoor equipment pack, you will want to consider the following:

The equipment pack must be located within a maximum of 15 feet from the spa.

Ensure the equipment running its normal filtration cycles does not make too much noise for spa owners and/or neighbors.

Ensure the equipment can be easily serviced for filter cleaning and periodic inspections in the location chosen.

If you are using a gas heater, you will need to consider wind and drafts as well as heater exhaust for proper heater placement. (See heater owner’s manual for important location and safety information.)

The equipment base and heater must be placed on either a 3 1/2” cement slab or 3” paving stones.

Make sure the equipment area selected will not be in an area where water could run or stand.

If the area receives direct sunlight, you will want to provide some pro- tection for the equipment portion of the equipment pack.

The equipment pack and heater are delivered separately. Do not cover gas heaters unless properly vented. (See heater owner’s manual for important safety information.)

LTR20091024, Rev. A

3

 

Page 5
Image 5
Cal Flame A726L, A734B, A515, A734L Allow for service access, Outdoor equipment pack in-groundspas only, LTR20091024, Rev. A